{"id":5078,"date":"2013-10-29T23:16:06","date_gmt":"2013-10-30T03:16:06","guid":{"rendered":"http:\/\/www.techwalls.com\/?p=5078"},"modified":"2013-10-29T23:16:06","modified_gmt":"2013-10-30T03:16:06","slug":"install-mac-os-x-windows-pc-without-help-mac","status":"publish","type":"post","link":"https:\/\/www.techwalls.com\/install-mac-os-x-windows-pc-without-help-mac\/","title":{"rendered":"How to install Mac OS X on Windows PC without the help of Mac?"},"content":{"rendered":"

Most of the people in the world have Windows based machine. I also have the same. I am using Windows for about 15 years and I got bored with the same.<\/p>\n

Then I thought of using Mac but those are pretty expensive out here. So I was thinking if we can install Windows on any custom build hardware then why can’t OS X? Then I searched about it on internet a lot and I do found a way to do same too but problem is that all the guides of installing OS X on PC are done with the help of Mac. So if I had Mac then why would install it on anything other.<\/p>\n

I have gathered information from various guides and tutorials at internet and prepared an easy and simple method to install OS X on Windows PC without the help of Mac. So follow the guide below if you want to create a hackintosh system.<\/p>\n

Note: All the processes can even damage your hardware so be careful and do it on your own risk. Installing Mac OS X on other hardware is against company’s policy unless you bought a retail DVD for the same.<\/strong><\/p>\n

Requirements<\/h2>\n

Before we start installing OS X in your PC you need following stuff without which it is impossible to do so.<\/p>\n

Hardware<\/strong><\/p>\n

If you want to install OS X on your PC then you need to have compatible hardware too because this makes the difference in this guide. If you are going to buy a whole new hardware or you want to check whether your hardware is compatible or not then check out this link<\/a>. It has detailed guide for the same.<\/p>\n

OS<\/strong><\/p>\n

You need to buy OS X retail DVD and a blank rewriteable CD.<\/p>\n

Procedure<\/h2>\n

As you have the required stuff we will now begin with the guide.<\/p>\n

Boot Disk<\/strong><\/p>\n

First of all you need to create Boot disk or USB Drive which will allow you to install OS X into a DVD or a USB drive directly. To create the image, use any software available on internet such as the free\u00a0Unibeast<\/a>. The\u00a0Mac program will modify the official OS X installer and then install it on a USB drive. Then you will use the USB drive to run on a PC.<\/p>\n

Configure your Bios<\/strong><\/p>\n

Now you need to configure Bios of your system. Enter the Bios setup of your machine. Now you need to alter setting of three categories as shown in picture below.<\/p>\n

\"install-mac-os-x-on-windows-1\"<\/p>\n

First head over to Advanced Bios Feature, <\/b>in that choose first boot option to CDROM. Then in Integrated peripherals<\/b>, switch the SATA and On-board SATA\/IDE Ctrl Mode to AHCI mode. Now in Power management Setup,<\/b> make HPET mode to 64-Bit.<\/p>\n

Install OS X<\/strong><\/p>\n